Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$2.00 $2.99 33% Off
- Aheadset preload adjusting bolt
$10.00
Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap. - Includes star nut
$18.00 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.00
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
$27.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00 - $33.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$34.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
$42.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
$47.99
The Box Three shifter makes good use of nylon composites in both top and bottom shells as well as the levers. Box Three is our performance and value tier. So this shifter sheds all the fancy trappings of the top 2 tiers but maintains their shifting characteristics. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).
$83.99
The Box Three Rear Derailleur simplifies the features found on the Prime 9 Box One and Two rear derailleurs making for a fully featured wallet friendly rear derailleur. Including a Limited Slip Clutch, Sealed bearing pulleys and a solid construction Box Three Rear derailleurs are compatible with 11-46 and 11-50t derailleurs making it one of the most versatile derailleur offerings for Prime 9.
$141.99
The Box Two Prime 9 Rear Derailleur is very similar to the Box One version however, to be more wallet friendly, it offers a non adjustable Tri-Pack Clutch, bushing pulleys and some muted finishes. Box Two rear derailleurs are still optimized for 11-50t cassettes and offer durability and performance for the most demanding terrain, just at lower price!
$214.99
Our Box Three tier delivers many of the same capabilities of its more famous siblings yet it's built upon a simpler platform. Cassettes are accessible at 11-46T or 11-50T and fashioned with steel spiders. The derailleur exploits our Limited Slip clutch technology without the Tri-pack features. Shift easily with a comparable mechanism, although you'll forgo the hinged clamp and die-cast structure. And lastly, string it all together with a Prime 9 chain but without extravagant coatings. If you're looking to bring your 2/3 by bike into the 21st century, then level up with this group!
$16.00
- Durable nylon+fiber body - Heat-treated chromoly spindle - Molded pins - Loose ball bearings - 375g/pair
$2.99
No one knows your ride better than you. The DBAIR was built upon the Double Barrel legacy to become the first air-sprung rear shock featuring Twin Tube technology and 4-way independent adjustability combined with an unrivaled level of quality. The DBAIR enables custom, rider-tuned damping performance, optimizing every bike for every rider. Cane Creek’s all new CS is the most innovative climbing feature available. Traditional climbing modes only address half of climbing dynamics, requiring the rider’s body to respond to the rest. Double Barrel CS provides climbing-specific damping in both compression and rebound. Keeping suspension fully active while you climb results in better connection to the trail and increased efficiency without annoying pedal-bob. When you’re ready to descend, it’s all Double Barrel. After all, what goes up MUST go down… DOUBLE BARREL TWIN TUBE TECHNOLOGY Exclusive Twin Tube Technology circulates oil continuously through the damping valving to achieve highly controllable, independent damping for both compression and rebound strokes. This unique design moves oil through externally adjustable valving instead of the main piston, allowing for superior tunability and eliminating the need for internal valving changes to achieve proper shock setup. CLIMBING SWITCH TECHNOLOGY CS is the most innovative climbing feature available. This proprietary climbing feature (patent-pending) for Double Barrel shocks alters the entire low frequency dynamic response of the shock to specifically address the demands of ascending on a bicycle. WEIGHT - ~509 grams (weight varies by size) DAMPING - Twin-tube independent compression and rebound in two high-speed and four low-speed damping circuits ADJUSTMENTS - 4-way independent adjustment: - High speed compression - Low speed compression - High speed rebound - Low speed rebound - Air spring rate SHAFT MATERIAL - Aluminum 7075 SHAFT DIAMETER - 8mm FINISH - Anodized and laser-etched MOUNTING INTERFACE - Norglide bushing 1/2" Universal Axle CAN SIZE - Standard (All Lengths), Extra Volume (200, 216, 222, 240)
$5.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings
$10.50
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction
$60.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 84g
$79.99 - $90.00
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$69.99
Our fixed bolt seatpost clamp is simple yet elegant and reliable. It's the perfect finishing touch to your Chromag kit. CNC machined in Canada. - Material: 6061 Alloy - Weight: 22g
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 100mm x 100mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 299g per pair
$249.99
The all-new Highline XC/Gravel delivers infinite adjustment, smooth feel, and easy installation. - 27.2mm seatpost diameter to fit most XC and gravel bikes - Jagwire cable and housing - Self-contained IFP hydraulic cartridge - Internal routing - Quick-connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Drop Bar Remote sold separately
$7.00
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut
$10.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Service Kit - 3-Pawl
$94.80
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles
$122.60
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T
We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability. - 34mm outer diameter with plush cushioning throughout - Deep-dish DEITY diamond pattern compresses for comfort but also provides traction - Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip - Tapered inner sleeve to insure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 133mm length with 34mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice - 118 grams for the set
Page 1 of 18 Next page