Filter By:
Stems

$29.99 - $36.99
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp.
- 31.8mm can be used with 26.0 bars with additional shim (SM5317)
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Weight: 130g-180g

$29.99
Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point.
- Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight
- Four bolt bar clamp holds bar securely in position
- Machined logo on bar clamp

$32.00
FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks.
- 3D-forged and CNC-machined from AL6061/T6
- 4-bolt cold-forged face plate
- Chromoly hardware
- ±6°
- 31.8mm handlebar clamp diameter
- 35mm fork clamp stack height
- 127 grams (100mm)

$33.99
High rise design with STC (Shark Tooth Clamping) inside the stem to help grip the bars. Central bore for reduced weight, unique side pocket detail.
- 6061-T6 alloy
- Bar Clamp Diameter (mm): 22.2
- Steerer Clamp Diameter: 1-1/8-inch
- Weight (oz): 10.61
- Stem Type: Front Load

$34.00
3D-forged and CNC-machined AL6061/T6 mountain bike stem.
- 4-bolt cold-forged alloy faceplate
- Chromoly hardware
- 40mm fork clamp stack height

$35.00 - $36.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

$40.00 - $45.00
The Guide Trail Stem is lightweight, durable, and provides excellent steering response. Available in super short lengths for use on new-school trail bikes with wide bars, short rear ends, and long front-center geometry.
- AL-6061-T6 aluminum construction
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design
- 31.8mm bar clamp
- Bead-blasted, then anodized, finish

$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

$45.00
The Guide Trail Stem translates your handlebar input into precise trail movements. It’s an ideal choice for modern trail bikes that have a long front center and wide bars. The Guide Trail Stem is lightweight, durable, and available in a variety of sizes to suit rider preferences.
- AL-6061-T6 aluminum construction
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design
- 35.0mm bar clamp
- 28.6mm stem clamp
- 40mm stack height
- Bead-blasted, then anodized, finish
$45.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components.
- Bead-blasted, then anodized, finish
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design for easy installation

$49.99
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in.
- Forged and machined from 6061 aluminum
- Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body
- Stack Height: 42mm

$50.00
Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.

$50.00 - $100.00
Thanks to an ingenious system of shims you slip over your fork, Specialized's S-Works CLP Multi Stem is adjustable in 2-degree increments from +/- 8 degrees to +/- 16 degrees for a perfect fit on your road or mountain bike and optimum ergonomics. Forged and CNC'd from 7050 aluminum for excellent lightness and strength, the S-Works CLP Multi Stem also boasts titanium bolts, a carbon top cap and a 4-bolt carbon/aluminum faceplate that's compatible with carbon and aluminum handlebars.
- 4° is adjustable from 4° to 12°
- 12° is adjustable from 8° to 16°

$53.00
Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

$53.00
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

$54.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look.
- Forged and machined from 6061 aluminum
- Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts
- Stack Height: 39mm
- Weight: 155g (60mm)

$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight
- Four bolt bar clamp holds bar securely in position
- Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts
- Faceplate eliminates ‘stress risers'

$55.00
Monza stems are precision machined from 6000 series T6 aluminum.
- For use with 1-1/8" steerer tubes
- Bar Clamp Diameter (mm): 22.2
- Reach: 50 mm
- Rise: 32 mm
- Steerer Clamp Diameter: 1-1/8-inch
- Stack Height: 30
- Weight (oz): 8.3
- Stem Type: Top Load

$55.00
Monza stems are precision machined from 6000 series T6 aluminum.
- For use with 1-1/8" steerer tubes
- Bar Clamp Diameter (mm): 22.2
- Reach: 57 mm
- Rise: 32 mm
- Steerer Clamp Diameter: 1-1/8-inch
- Stack Height: 30
- Weight (oz): 8.9
- Stem Type: Top Load

$55.00
Monza stems are precision machined from 6000 series T6 aluminum.
- For use with 1-1/8" steerer tubes
- Bar Clamp Diameter (mm): 22.2
- Reach: 63 mm
- Rise: 32 mm
- Steerer Clamp Diameter: 1-1/8-inch
- Stack Height: 30
- Weight (oz): 9.3
- Stem Type: Top Load

$56.00
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.

$58.00
Basic, clean, and dependable performance—that's the Gossamer stem. 6061-T6 aluminum is forged and then CNC-machined to achieve the Gossamer's shape. The four-bolt faceplate is cold-forged and holds the bars with authority. Laser-etched graphics are the finishing touch.
- 3D-forged and CNC-machined from AL6061/T6
- 4-bolt cold-forged front clamp diameter
- Chromoly hardware

$59.00
TruVativ's Stylo T30 Stem is 3D forged from 7050 aluminum for that perfect balance of low weight, stiffness and precision steering control uphill or downhill. Four bolts securely attach the face plate and also make changing out handlebars a breeze.

$60.00
3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration.
- 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem.
- Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths.
- Compatible with the Specialized accessory mount.

$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems.
- Class-leading stiffness-to-weight ratio
- More options for a better fit
- New faceplate and geometry for greater stiffness and easier installation
- Distinctive silver finish

$64.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.

$66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.

$69.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.

$70.00
Built strong to take on the world's toughest trails, Descendant stems keep you pointed in the right direction.
- Bar Clamp Diameter (mm): 31.8 mm
- Material: Aluminum
- S.H.I.S. Stem Clamp Diameter: 28.6

$81.00
The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount.
- ±6° angle
- Integrated GoPro mount
- T25 fasteners for 1 tool across the cockpit
SPECIFICATIONS
- Stem Angle/Rise: 6 degrees
- Clamp diameter: 31.8mm
- Steerer clamp diameter: 1-1/8 in
- Hardware: Steel
Page 1 of 2
Next page