Other

$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains

$3.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool

$4.00
Tools for repair and maintenance of RockShox Reverb suspension seatposts.
- Specific to RockShox Reverb post

$4.25
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes

$5.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal.
- Compatible with 41mm and 42mm OD upper bearings

$5.99 - $8.99
The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

$6.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$7.49
Notched binder bolts for frames with integrated seat collars.
Details:
CroMoly steel bolts
Three lengths available: 16, 19 and 21mm
8mm diameter

$7.99 - $13.85
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

$9.95
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale.
- Design and manufactured in Minneapolis, MN USA
- 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only
- 6061-T6 aluminum
- 5mm internal cylinder wall height
- Black aluminum bolt included
Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.

$9.99 - $16.50
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.

$9.99
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

$9.99 - $11.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims.
-100mm long
-3mm lip
-Alloy
Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

$10.00
Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap.
- Includes star nut

$10.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Service Kit - 3-Pawl

$10.00
One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.
Page 1 of 5
Next page