Parts

- Aheadset preload adjusting bolt

Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap. - Includes star nut

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

The Box Three shifter makes good use of nylon composites in both top and bottom shells as well as the levers. Box Three is our performance and value tier. So this shifter sheds all the fancy trappings of the top 2 tiers but maintains their shifting characteristics. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

The Box Three Rear Derailleur simplifies the features found on the Prime 9 Box One and Two rear derailleurs making for a fully featured wallet friendly rear derailleur. Including a Limited Slip Clutch, Sealed bearing pulleys and a solid construction Box Three Rear derailleurs are compatible with 11-46 and 11-50t derailleurs making it one of the most versatile derailleur offerings for Prime 9.

The Box Two Prime 9 Rear Derailleur is very similar to the Box One version however, to be more wallet friendly, it offers a non adjustable Tri-Pack Clutch, bushing pulleys and some muted finishes. Box Two rear derailleurs are still optimized for 11-50t cassettes and offer durability and performance for the most demanding terrain, just at lower price!

Our Box Three tier delivers many of the same capabilities of its more famous siblings yet it's built upon a simpler platform. Cassettes are accessible at 11-46T or 11-50T and fashioned with steel spiders. The derailleur exploits our Limited Slip clutch technology without the Tri-pack features. Shift easily with a comparable mechanism, although you'll forgo the hinged clamp and die-cast structure. And lastly, string it all together with a Prime 9 chain but without extravagant coatings. If you're looking to bring your 2/3 by bike into the 21st century, then level up with this group!

- Durable nylon+fiber body - Heat-treated chromoly spindle - Molded pins - Loose ball bearings - 375g/pair

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 84g

Our fixed bolt seatpost clamp is simple yet elegant and reliable. It's the perfect finishing touch to your Chromag kit. CNC machined in Canada. - Material: 6061 Alloy - Weight: 22g

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 100mm x 100mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 299g per pair

The all-new Highline XC/Gravel delivers infinite adjustment, smooth feel, and easy installation. - 27.2mm seatpost diameter to fit most XC and gravel bikes - Jagwire cable and housing - Self-contained IFP hydraulic cartridge - Internal routing - Quick-connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Drop Bar Remote sold separately

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Service Kit - 3-Pawl

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T

We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability. - 34mm outer diameter with plush cushioning throughout - Deep-dish DEITY diamond pattern compresses for comfort but also provides traction - Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip - Tapered inner sleeve to insure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 133mm length with 34mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice - 118 grams for the set

DEITY Grip Clamps offer a way to customize your bike to match your style.

In true DEITY fashion, the Crosshair Headset Cap exemplifies the style and detail you've come to expect from everything DEITY offers. We've included 3mm, 5mm, and 8mm spacers that are color-matched to create a clean refined option to finish off your cockpit. Not only are the cap and spacers machined from 6061 Aluminum, the bolt is CNC Machined from 7075 Aluminum to give you a precise and extremely durable centerpiece that is truly hassle-free. - Complete Aluminum 1 1/8" Headset Cap Kit - Features 7075 T6 Machined Aluminum Bolt - Includes 3mm, 5mm, and 8mm Spacers - Spacers Feature a Thin Profile For a Minimalist Style - Countersunk Bolt Design - Kit Includes the Star Nut - Weight: 13 grams (without star nut)

The grip of choice for World Cup-style assassin and gloveless wonder, Sam Blenkinsop, the KNUCKLEDUSTER embodies our attention to detail and our focus on function! Not only have we developed our TRC rubber blend that gives you remarkable grip with incredible durability, the KNUCKLEDUSTER also features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and, coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel in a stunning package. Featuring a mushroom pattern to minimize vibration, the true magic of the KNUCKLEDUSTER lies in the V channel chevron ribs that ergonomically fill the swell of your palm and then seamlessly transition to a recessed half waffle on the underside. Why is this magic? All half waffle patterns are outboard and are notorious for creating hot spots on long rides. By designing the top to seamlessly transition to a recessed half waffle pattern, your fingers sit perfectly into the grip and allow you full control even in the roughest of conditions without being plagued by hot spots or blisters. The KNUCKLEDUSTER grips truly are an "all day grip" that allow you to keep it Pinned Wide Open at all times! - The benchmark in grip design - DIRT MAG Top 100 Product for 2018 - Featuring DEITY TRC rubber compound for exceptional durability - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black-ano 6061-T6 aluminum clamps - Short and wide rib design for added comfort with no side-to-side play - Half-waffle recessed design for added control without hot spots - Chevron v-channel design for your palm swell to give an ergonomic feel - Seamless transition through the end of grip for comfort - 132mm length with 32mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 101 grams for the set

Overwhelming demand for a diamond version of the Deity Knuckleduster lead us to the phenomenal feel of the Lockjaw.. With sweeping transitions from the padded thumb area to the deep dish diamond top pattern to a recessed half waffle, the Lockjaw delivers a technically precise feel from end to end. Utilizing TRC+ rubber compound allows us to maintain industry leading durability but delivered in a soft, plush and sticky durometer. By combining our tapered inner sleeve and single lock ring system coupled with our new extra grippy rubber and recessed half waffle, the Lockjaw gives you an extremely responsive feeling cockpit

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform

Black Kat pedals are built around a larger double sealed bearing sytem, With a larger platform, thinner body and over all lighter appeal, these pedals bring great value. By utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout and included an additional pin kit with every purchase. - Extruded and CNC Machined 6061 T6 Aluminum - 100mm x 100mm platform - Concave body - Fully Serviceable DU Bushing and Double Micro Sealed Bearing System - Intended Use: Downhill, FR/DJ, Enduro, All Mountain - Allen bolt style pins - Additional Allen Pin kit included

- Aluminum straddle cable carrier for cantilever brake

Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips

Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch

Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

Our largest most shock absorbing grips! Fatty’s have plush 8 pillows to optimize shock absorption and grip! - Fits most handlebars - Made from 100% Silicone - Latex & Rubber Free - Made in the USA - 35mm thickness - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included *Install Bar Plugs first for the protection of grips and ease of installation

Adhesive gel backing, anti-shock foam, and the soft feel of microfiber cloth will keep your hands happy on even the longest rides. Easton's Microfiber Bar Tape is cushy without deadening road feel and doesn't get slippery when wet.

- 7075-T6 aluminum ring for Easton Cinch system Road/CX/Gravel cranks - Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke - Narrow-wide tooth profiling prevents chaindrop with a guide or clutch derailleur - Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool - 47mm chainline with the Easton 129mm spindle - 38T (80g), 40T (91g), 42T (98g), 44T (105g), 46T (112g), 48T (123g), 50T (137g)

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

The new GFR1 has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower gripping zone is aggressive to keep gripping forces at a minimum when lifting the front wheel. - Shape: Round - Lock On: Yes - Grip Shift Specific: No - Flange: No

The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday. - Length: 135mm - Lock On: Yes - Weight: 105g

The Delta pedal is upgraded with a stainless abrasion plate to decrease direct scratch to pedal body, which increases durability. In addition to that, the material has been changed to thermoplastic which makes it lighter weight. The E-PR73ST features low stack height which allows greater ground clearance as well as increased pedaling efficiency. - 85 x 94 mm - Fiberglass-reinforced thermoplastic, enclosed mechanism, tension adjustable with gauge - 9/16"

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset

- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability. - Precision CNC machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - 110mm asymmetric (ABS) - Black anodized with CNC silver - Laser etched logo - Compatible only with Gossamer ABS cranks - Will not properly fit K-Force or SL-K cranksets

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

Fizik's Superlight Glossy Bar Tape dresses up your bike with a classy shine and incredible grip. Durable, stretch-resistant and super-comfortable on your hands, the Glossy Bar Tape is made of Microtex, a perforated synthetic-leather that's smooth and grippy, even when wet.